Race Series Oiling System. Fits Milwaukee-Eight 2017up With Oil Cooled Engine.

ROLLIES PART No: FE-7097

FITMENT NOTE:

M8 engines must check clearance on front exhaust lifter to camshaft flange fit

FITS :

RACE SERIES OILING SYSTEM, Gear or Chain drive, M8 17up Water Cooled engines.

* If using gear drive cams in.Block-off Platein. part # FE-8016 is required

* Kits include a RACE SERIES® oil pump, RACE SERIES® lifters, HIGH FLOW camplate and cam installation kit.

PRODUCT DETAILS :

FEULING® WATER COOLED oiling system kits combine all the neededcomponents to finish your M8® engines oiling system under 1 Part number. FEULING® oiling system kits increase oil pressure, oil volume, engine oil flow and return oil scavenging

• Quieter and smoother engine operation

• Increase oil pressure, scavenge volume and engine oil flow

• 30% more pressure gear volume over stock

• 53% more scavenge gear volume over stock

• 42% more scavenge volume with port sizing, matched passages and holes to the engine case

• 68% more oil volume to the crankshaft and connecting rod bearing

• 15-25 degree cooler engine temperatures

• 15-30 degree cooler oil temperatures

• 10-30 more PSI of oil pressure

• Reduces wet sumping, blow by and oily air cleaners

• Magnets in oil pump to help protect gears and pressure relief valve

• Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on M8

• NOTE: FEULING test results show a 50% reduction of engine sump oil level.

RACE SERIES® kits include FEULINGS® HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory camplates. FEULING® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.

The FEULING oil pumps are b